Sizing Chart and Adjustment Guides

SIZING GUIDES

SANDAL SIZING CHART

We strongly recommend using the templates to check your foot size to ensure a perfect fit!

NOTE: Make sure your printer doesn’t resize or shrink to fit when printing! Larger sizes will need to be printed Poster across 2 sheets of paper.

 Want help picking a sandal model? Use this chart!

Sandal Guide

Shamma Size	US Men’s	US Women’s	Sandal Length (Inches)	Templates
4	N/A	5	8.875	PDF
5	N/A	6	9.25	PDF
5.5	N/A	6.5	9.4375	PDF
6	6	7	9.625	PDF
6.5	6.5	7.5 – 8	9.875	PDF
7	7	8.5	10	PDF
7.5	7.5	8.5 – 9	10.125	PDF
8	8	9 – 9.5	10.3125	PDF
8.5	8.5	9.5 – 10	10.5	PDF
9	9	10 – 10.5	10.625	PDF
9.5	9.5	10.5 – 11	10.8125	PDF
10	10	11 – 11.5	10.9375	PDF
10.5	10.5	11.5 – 12	11.125	PDF
11	11	12	11.3125	PDF
11.5	11.5	N/A	11.5	PDF
12	12	N/A	11.625	PDF
12.5	12.5	N/A	11.765	PDF
13	13	N/A	11.9375	PDF
14	14	N/A	12.25	PDF

Shamma Kids Sizes	Sandal Length (Inches)	Templates
1	7.26	PDF
2	7.51	PDF
3	7.76	PDF
4	8.0	PDF
5	8.26	PDF
6	8.56	PDF

Shamma Sandals use custom soles that are designed to give you the best possible fit and experience, so please check your measurements with our sandal sizing chart. The templates of the sandals are available for download and printing.

To size yourself, print the template out and place your foot on the template so that the toe hole is between your big toe and first little toe. Make sure that your toes aren’t hanging off the front of the template, and that your ankles line up with the ankle slots on the sides of the sandal. If the ankle slots are under your foot a little bit, that’s ok, the laces come up and around your feet – just make sure that your toes don’t go past the front of the sandal, that your heel doesn’t go past the back of the sandal, and that the toe hole and ankle slots line up with your feet. For the best fit, we recommend choosing a sandal size that gives you between an 1/8" (3.18mm) to a 3/16" (4.76mm) of extra room in front of your toes and behind your heel.

BOOT SIZING CHART 

For boot sizing, you can generally go with your standard street shoe size. If you want to double check, use these boot sizing templates below!

NOTE: Make sure your printer doesn’t resize or shrink to fit when printing! Check the measuring line of the template to a physical ruler before sizing! Larger sizes will need to be printed Poster across 2 sheets of paper.

Shamma Size	US Men’s	US Women’s	Sandal Length (Inches)	Templates
5	N/A	6	9.25	PDF
5.5	N/A	6.5	9.4375	PDF
6	6	7	9.625	PDF
6.5	6.5	7.5 – 8	9.875	PDF
7	7	8.5	10	PDF
7.5	7.5	8.5 – 9	10.125	PDF
8	8	9 – 9.5	10.3125	PDF
8.5	8.5	9.5 – 10	10.5	PDF
9	9	10 – 10.5	10.625	PDF
9.5	9.5	10.5 – 11	10.8125	PDF
10	10	11 – 11.5	10.9375	PDF
10.5	10.5	11.5 – 12	11.125	PDF
11	11	12	11.3125	PDF
11.5	11.5	N/A	11.5	PDF
12	12	N/A	11.625	PDF
12.5	12.5	N/A	11.765	PDF
13	13	N/A	11.9375	PDF
13.5	13.5	N/A	12.16	PDF
14	14	N/A	12.25	PDF
14.5	14.5	N/A	12.50	PDF

ADJUSTMENT GUIDES

Did you receive your new pair of Shammas, but looking for some extra tips on how to get the perfect lace adjustments? Look no further! Below you can find step-by-step written instructions as well as videos for how to lace your sandals!

Elite Lacing System 

(Our Elite Lacing System includes models: Warriors, Warriors LE, Warriors Maximus, Warriors Maximus LE, Chargers, Chargers LE, Mountain Goats, Mountain Goats LE).

1. First,  loosen all 3 strap zones until there is excess slack in each section. The straps should be extremely loose in all three zones.

2. Start by centering your foot on the sandal, so that the placement of your foot is in the desired final location (you should have equal room in front of your toes and behind your heel with this placement). 

3. Now that your foot is centered on the sandal, adjust the buckle front to back to find a desirable location. 

4. Now tighten the insole strap. This will dictate the buckle’s left to right position on your foot. Keep the buckle parallel with the bone behind your big toe. If the buckle is too close to the bone behind your big toe it may be uncomfortable. If this is the case, loosen the insole strap and reposition the buckle farther to the outside of the foot.

5. Now that the buckle is in it’s desired position and the insole strap is tightened, tighten the toe strap until snug and comfortable.

6. Tighten the heel strap to your desired comfort level and enjoy your Shamma Sandals!

 Super Lacing System

 (Our Super Lacing System includes models: Super Browns, Super Goats).

Models in our Super Collections have 3 adjustment zones for the perfect fit- the toe strap, the insole strap, and the heel strap. 

1. First, loosen all 3 strap zones until there is excess slack in each section. The straps should be extremely loose in all three zones.

2. Start by centering your foot on the sandal, so that the placement of your foot is in the desired final location (you should have equal room in front of your toes and behind your heel with this placement). 

3. Now that your foot is centered on the sandal, adjust the buckle front to back to find a desirable location. 

4. Now tighten the insole strap. This will dictate the buckle’s left to right position on your foot. Keep the buckle parallel with the bone behind your big toe. If the buckle is too close to the bone behind your big toe it may be uncomfortable. If this is the case, loosen the insole strap and reposition the buckle farther to the outside of the foot.

5. Now that the buckle is in it’s desired position and the insole strap is tightened, pull any extra slack from the toe strap zone through the outside ankle slot towards the heel. 

6. Tighten the heel strap to your desired comfort level and enjoy your Shamma Sandals!

Classic Lacing System 

(Our Classic Lacing System includes models: All Browns, All Blacks, Old Goats).

For Classic Lacing Guides, please click HERE

Cruzer Lacing System

(Our Cruzer Lacing System includes the Cruzers and Pacific Blue Cruzers models).

Our Cruzers  models have 3 adjustment zones for the perfect fit- the toe strap, the insole strap, and the heel strap. 

1 - Adjust to Desired Fit

After centering your foot on the sandal, adjust the outside lacing so that the buckle is in a comfortable position and there is tension (but not too much) between the toe plug and ankle slot.

2. Pull On Power Sleeve

Adjust the Heel Strap by pulling up on the power sleeve, to create some space to tighten the Heel Strap. It should be enough space to grab the slack with two fingers.

3. Pull Slack Through

Pulling from the Heel Strap side, pull the extra slack through the bottom of the sandal until the Power Sleeve is resting in a snug position.

4.  Pull On Power Sleeve

Pulling from the Inside Lacing side of the Power Sleeve, pull the extra slack through the Power Sleeve until the strap is flush with the sole of the sandal.

5. Adjust To Desired Fit

First, create slack underneath the buckle by creating some tension on the inside lacing side of the buckle. Adjust the lacing until Comfortable.

6. Pull Slack Through

Take extra slack and feed it back through the buckle, towards the inside lacing of the sandal. Pull slack until the buckle is flush with the foot.

7. Put Extra in Keeper

To keep the extra slack secure, feed the strap through the keeper and pull until comfortable. You are now ready to explore!

If you're having trouble finding the perfect fit after following the sizing or lacing guides, or if you have any questions, please Contact Us, we’re happy to help!